Polyethylene barrier buoy
The anchoring buoy is a floating object that is used to anchor private vessels, fishing boats in deep and shallow depths
For the first time in Iran, Marine Plast has produced a variety of containment buoys made of polyethylene, which are available in different sizes and uses
All these floats are equipped with foam and are produced with hot galvanized joints
In general, polyethylene buoys are used to mark different areas and also to separate territories
One of its most common uses is in installing fish breeding cages
To get more information about this, contact the numbers on the website and get in touch with the specialists of this collection to order a high-quality and suitable type of this product
A few words about Marineplast
Aria Plastic Machinery Marine Industries, as the only manufacturer of special polyethylene products for marine industries with ISIC code, such as marker buoys, mooring buoys, guide buoys, wave recorders and specialized floating docks and fish breeding cages in Iran, marine industry products It offers itself under the brand name of Marine Plast.
ISO standards
Learn more: One of the other types of these floats is its marker type. To get more information in this field and also to order and buy its quality type, enter the following link
marker buoy
This float produced by us is produced and supplied in various dimensions and sizes. Its different volumes are listed below
Volume: 880 liters
Volume: 550 liters
Volume: 330 liters
Volume: 2500 liters
Volume: 1600 liters
Volume: 1250 liters
Volume: 3500 liters
The polyethylene anchoring buoy is connected to a rope or chain that is anchored to the seabed.
In general, 3 types of anchors are used
chain
Rope
A combination of chain and rope
Most of these objects have a bright color that can be seen and identified from far away
One of the other equipments in the containment system is the sinker. In fact, these vessels are equipped with heavier loads that are placed on the seabed. These heavy loads are called sinkers
Sinkers are usually made of cement, because they must have enough density and weight to be placed on the bottom of open water
When the sinker is placed on the sea floor, it is connected to the floating object on the surface of the water by a rope or chain
It should be noted that the length of the rope is determined based on the radius in which the float should float
Know more: among other vessels that are used as a warning and also a guide in the seas by receiving signals from the surroundings, the guide type is one of these vessels
For more information, enter the following link
guide buoy
What is the purpose of using a containment buoy
The first purpose of using a mooring buoy is to prevent the release of the anchor of ships that are connected to the sea floor by ropes. Therefore, the marine ecosystem is preserved.
The second goal is to prevent ships from hitting the ground. In fact, the ships are restrained and prevented from moving due to the impact of the waves on them as well as the current of the wind.
How many types does this float contain
This float, which is one of the polyethylene products of the marine industry, is used in the following two ways
single point mode with the abbreviation SPM
Multiple points mode with the abbreviation MBM
Conditions such as the weight of the ship and local conditions are the factors that determine which type to use
Polyethylene products of Marine Plast marine industries
What systems are used in the containment network
The following two systems are used in the containment network
Halas system
Manta system
The Halas system is suitable for use on smooth surfaces with a stone bed. The equipment used in it includes this type of float and sinker. In fact, 3 cement sinkers are placed on the bottom of the open water and connected to the floating object on the surface of the water by a rope
The Manta system is suitable for seas with a sandy bottom. Since the sea floor is soft in this case, there is less damage to the aquatic ecosystem
How is the design and color chosen and done
As mentioned before and according to the pictures you have seen so far, this system consists of 3 components: an anchor (which is a cement sinker), a rope or chain, and a mooring buoy.
The purpose of using this system is to control or a series of markings.
An important point that should be taken into account in its design is that the least damage should be done to aquatic and marine plants and to the aquatic ecosystem in general.
If ropes are used instead of chains, these ropes must have sufficient strength and resistance.
One of the reasons why we recommend you to use a rope instead of a chain is the less friction of the rope than the chain.
It is very important to pay attention to the color of the mooring buoy, that it is important to use a bright type to be visible, especially from a long distance. Especially at night, they should be well identifiable and visible.
What are the steps involved in planning and installing a containment buoy
There are a series of points that should be paid special attention to during the work phase of the projects. In general, the installation and planning stages related to the containment network include the following
- Coordination and regulation
- Survey
- Determining the type of materials used
- installation
- maintenance
- The floating financing program of this product
In the following, we will give a brief explanation about each of the mentioned items
Coordination and regulation
A series of coordinations must be done with related institutions before starting the installation of the network. Especially in the case of protected areas, it is very important to make the necessary arrangements with the managers of these areas
Conduct a survey
By conducting a proper survey, things such as environmental conditions, environmental effects, etc. are determined
Determining the exact location of the containment buoy installation is very important and necessary calculations should be made in this field
Also, the water tide situation, which has a decisive role on the location of this network, should be checked in advance
Determining the type of materials used
Since this product has the role of restraining all kinds of marine vehicles with different dimensions and weights, it is very important what kind of material is used in their internal structure. In fact, these objects must have high resistance and strength, and their ability to stay afloat is also high
Installation
The containment buoy is installed in two stages
In the first stage, they are assembled and marked, and in the second stage, they are installed in specific geographical points whose coordinates are predetermined and calculated
Maintenance
Maintenance of the restraint system is a very important process. The maintenance of all types of equipment related to it have an impact on the stability of this network during its lifetime
It is recommended to use relevant specialists for maintenance and repair of its various components
Many times it happens that the buoy is lost due to some reasons. Since this object plays an important role in the sea, it must be replaced immediately
Financing program
Providing adequate funds for the establishment of the containment network is one of the most important issues that you should pay attention to. In fact, you must make sure that there is enough budget for equipment purchase, installation, commissioning and maintenance
For more information, as well as to order and buy anchor buoys, please contact the numbers on the website.
High Quality
Experience the best polyethylene products of the marine industry with Marine Plast
Technical advice
You can contact the experts of the collection to get information about the products and project
After sales service
To receive after-sales service, please contact the experts of the collection
Cooperation in the implementation of the project
Contact us to start cooperation in various marine projects
Marine Plast
Aria Plastic Machinery Marine Industries, as the only manufacturer of special polyethylene products for marine industries with ISIC code, such as marker buoys, mooring buoys, guide buoys, wave recorders and specialized floating docks and fish breeding cages in Iran, marine industry products It offers itself under the brand name of Marine Plast
Ways of communication with Marine Plast
- 021-22635063-5
- Marineplast2010@gmail.com
- Miri Alley, No. 30, Dorahi Qolhak, Shariati St, Tehran
All site rights belong to Marine Plast